Chapter 1:<\/p>\n
In chapter 1, some of the base information of GIS and data used for it were discussed. The general process for using GIS is detailed at the start of the chapter. The steps included were framing your question, understanding your data, choosing a method, processing your data, and looking at the results. These steps are important for ensuring that you are approaching your analysis correctly and choosing the right methods. The chapter also details the different types of geographic features: discrete features, continuous phenomena, and features summarized by area. Discrete features are where the presence of a feature can be determined at a specific pinpointed location. Continuous phenomena blanket the entire map and can be enclosed by boundaries. Features summarized by area get a count or density of features within an area’s boundaries. A lot of data is like this, but does not have precise location details. The differentiation between geographic features is important for determining how to analyze the data. Geographic features can either be vector or raster. For vector features, each feature is a row in a table and feature shapes are defined by x,y locations. Vectors are used for discrete features, data summarized by area, and continuous categories. For raster features, the features are represented by a matrix of cells in continuous space. Rasters are used for continuous categories and continuous numeric values. They can also be used for discrete features when layering. The chapter also discussed how geographic features can have different attributes. These attributes included categories, ranks, counts, and ratios. At the end, the chapter detailed how to work with tables when using GIS. Subsets of data are selected to work with or assign attributes values to. Attribute values are calculated to assign ranks, ratios, or averages. The attribute values can be summarized to get statistics. Overall, I felt that this chapter did a good job covering the basics of understanding geographic data usage in GIS.<\/span><\/p>\n Chapter 2:<\/p>\n Chapter 2 introduced some of the information needed to make quality maps. First, you need to decide what to map. Different maps require different types of information and different amounts of information, so you must decide what is right for the map you are trying to make. Considering how you will use the map will help you make this decision. To prepare your data to be mapped you have to make sure that the necessary geographic coordinates and categories are assigned. If the data come from the GIS database, then coordinates are likely to already be assigned. You can map a single type of feature or map by categories. When mapping by categories you can choose to group the categories. If you have more than seven categories, it is recommended that you group them into broader categories. However, grouping categories can change how the data is perceived by the reader, so be careful with how you group them. There are several ways you can group categories in the data. These include using two different codes to represent categories and subcategories, joining a detailed code to a general code after, and assigning symbols to various detailed categories that comprise each general category. When using symbols it is important to do it effectively. Use a single symbol for each individual location, but do not overcrowd the map. For linear symbols, using width and pattern differences are helpful for differentiating the symbols. You should also make the symbols for similar categories shades of the same color. If you are printing the map make the symbols larger and keep in mind that printers usually have better resolution than screen displays. It was also discussed in this chapter that adding reference features, like recognizable landmarks and roads, can help orient the reader. Adding relevant features, like adding store locations if you are mapping customers, can help add context to the map. Map reference features should be displayed in pale colors. When analyzing the patterns on your map, you may need to zoom in or out to see patterns, so keep that in mind when sizing the map. This chapter helped me understand important factors when making maps, especially in regards to using categories and symbols.<\/span><\/p>\n Chapter 3:<\/p>\n Chapter 3 discussed more important factors in creating maps, with a focus on quantities, classes, and map styles. It was again discussed how it is important to understand the goal of your map before making it. You need to consider what kind of data you are mapping. Are your data discrete features, continuous phenomena, data summarized by area? Understanding this helps you decide how to display the data. You should also consider if you are using the map to explore patterns or if you are presenting the data. When exploring you should show more detail to find patterns, but when presenting the map use generalized data to reveal patterns. There are several ways that quantities can be used in displaying data in maps. You can use counts, the actual numbers, or amounts, the total of value, to display discrete features or continuous phenomena, but not for summarizing by area. You can use ratios to show the relationship between two categories to even out differences between large and small areas to map more accurately when summarizing by area. Ranks can be used to put features in order from high to low and show relative values instead of measured values, which is\u00a0 useful when direct measures are difficult. You can use classes to display your data in a way that is easier for viewers to understand. There are several classification schemes that can be used. These include natural breaks, which find patterns inherent in your data, quantiles, which compare areas of roughly same size, equal intervals, which use equal intervals to appeal to a nontechnical audience, and standard deviation, which shows if features are above or below average. Each of these schemes have their own advantages and disadvantages, so it is important to consider carefully which best fits the needs of your data. It is recommended that you only use 4-5 classes in your display. This chapter also discussed important choices needed in making the maps. Different types of data need to be displayed in different ways. Maps of discrete locations and lines should use graduated symbols, charts, or 3D views. Maps or discrete areas or data summarized by area should use graduated colors, charts, or 3D views. Maps of continuous phenomena should use graduated colors, contour lines, or 3D views. There are several things to consider when using these displays, like colors, sizes, intervals, and perspective, so care should be taken to make these decisions. Effectively displaying your data allows for patterns to be found most efficiently. I found this chapter to be helpful in understanding how the seemingly small features of maps can have a big impact on how they are interpreted. <\/span><\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":" Chapter 1: In chapter 1, some of the base information of GIS and data used for it were discussed. The general process for using GIS is detailed at the start of the chapter. The steps included were framing your question, understanding your data, choosing a method, processing your data, and looking at the results. These steps are important for ensuring that you are approaching your analysis correctly and choosing the right methods. The chapter also details the different types of geographic features: discrete features, continuous phenomena, and features summarized by area. Discrete features are where the presence of a feature can be determined at a specific pinpointed location. Continuous phenomena blanket the entire map and can be enclosed by boundaries. Features summarized by area get a count or density of features within an area’s boundaries. A lot of data is like this, but does not have precise location details. The differentiation between geographic features is important for determining how to analyze the data. Geographic features can either be vector or raster. For vector features, each feature is a row in a table and feature shapes are defined by x,y locations. Vectors are used for discrete features, data summarized by area, and continuous categories. For raster features, the features are represented by a matrix of cells in continuous space. Rasters are used for continuous categories and continuous numeric values. They can also be used for discrete features when layering. The chapter also discussed how geographic features can have different attributes. These attributes included categories, ranks, counts, and ratios. At the end, the chapter detailed how to work with tables when using GIS. Subsets of data are selected to work with or assign attributes values to. Attribute values are calculated to assign ranks, ratios, or averages. The attribute values can be summarized to get statistics. Overall, I felt that this chapter did a good job covering the basics of understanding geographic data usage in GIS. Chapter 2: Chapter 2 introduced some of the information needed to make quality maps. First, you need to decide what to map. Different maps require different types of information and different amounts of information, so you must decide what is right for the map you are trying to make. Considering how you will use the map will help you make this decision. To prepare your data to be mapped you have to make sure that the necessary geographic coordinates and categories are assigned. If the data come from the GIS database, then coordinates are likely to already be assigned. You can map a single type of feature or map by categories. When mapping by categories you can choose to group the categories. If you have more than seven categories, it is recommended that you group them into broader categories. However, grouping categories can change how the data is perceived by the reader, so be careful with how you group them. There are several ways you can group categories in the data. These include using two different codes to represent categories and subcategories, joining a detailed code to a general code after, and assigning symbols to various detailed categories that comprise each general category. When using symbols it is important to do it effectively. Use a single symbol for each individual location, but do not overcrowd the map. For linear symbols, using width and pattern differences are helpful for differentiating the symbols. You should also make the symbols for similar categories shades of the same color. If you are printing the map make the symbols larger and keep in mind that printers usually have better resolution than screen displays. It was also discussed in this chapter that adding reference features, like recognizable landmarks and roads, can help orient the reader. Adding relevant features, like adding store locations if you are mapping customers, can help add context to the map. Map reference features should be displayed in pale colors. When analyzing the patterns on your map, you may need to zoom in or out to see patterns, so keep that in mind when sizing the map. This chapter helped me understand important factors when making maps, especially in regards to using categories and symbols. Chapter 3: Chapter 3 discussed more important factors in creating maps, with a focus on quantities, classes, and map styles. It was again discussed how it is important to understand the goal of your map before making it. You need to consider what kind of data you are mapping. Are your data discrete features, continuous phenomena, data summarized by area? Understanding this helps you decide how to display the data. You should also consider if you are using the map to explore patterns or if you are presenting the data. When exploring you should show more detail to find patterns, but when presenting the map use generalized data to reveal patterns. There are several ways that quantities can be used in displaying data in maps. You can use counts, the actual numbers, or amounts, the total of value, to display discrete features or continuous phenomena, but not for summarizing by area. You can use ratios to show the relationship between two categories to even out differences between large and small areas to map more accurately when summarizing by area. Ranks can be used to put features in order from high to low and show relative values instead of measured values, which is\u00a0 useful when direct measures are difficult. You can use classes to display your data in a way that is easier for viewers to understand. There are several classification schemes that can be used. These include natural breaks, which find patterns inherent in your data, quantiles, which compare areas of roughly same size, equal intervals, which use equal intervals to appeal to a nontechnical audience, and standard deviation, which shows if features are above or below average. Each of these schemes have their own advantages and disadvantages, so it is important to consider carefully which best fits the needs of your data. It is recommended that you only use 4-5 classes in your display. This chapter also discussed important choices needed in making the maps. Different types of data need to be displayed in different ways. Maps of discrete locations and lines should use graduated symbols, charts, or 3D views. Maps or discrete areas or data summarized by area should use graduated colors, charts, or 3D views. Maps of continuous phenomena should use graduated colors, contour lines, or 3D views. There are several things to consider when using these displays, like colors, sizes, intervals, and perspective, so care should be taken to make these decisions. Effectively displaying your data allows for patterns to be found most efficiently. I found this chapter to be helpful in understanding how the seemingly small features of maps can have a big impact on how they are interpreted. <\/p>\n","protected":false},"author":2424,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[4],"tags":[],"class_list":["post-7314","post","type-post","status-publish","format-standard","hentry","category-course-student-work"],"_links":{"self":[{"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/posts\/7314","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/users\/2424"}],"replies":[{"embeddable":true,"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/comments?post=7314"}],"version-history":[{"count":1,"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/posts\/7314\/revisions"}],"predecessor-version":[{"id":7315,"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/posts\/7314\/revisions\/7315"}],"wp:attachment":[{"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/media?parent=7314"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/categories?post=7314"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sites.owu.edu\/geog-291\/wp-json\/wp\/v2\/tags?post=7314"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}